How To Assemble And Operate The Vacuum; How To Adjust The Handle - CleanMax CMNR-QD Operating Instructions Manual

How to Assemble and Operate the Vacuum

How to Attach the Handle to the Vacuum Cleaner
The vacuum and the handle are packed separately.
1. After first removing the handle screw, slide the handle into the slot
on top of the vacuum cleaner.
2. Line up the small hole on the handle with the small hole on the
vacuum cleaner and insert the screw. Make sure the screw is
tightened securely (Fig. 1).
3. Wind the power cord around the metal cord hook and the carry
handle when storing the vacuum cleaner (Fig. 2).
On/Off Pedal
1. To turn the vacuum on, push the power pedal on the right side of
the vacuum nozzle from the user's perspective (Fig. 3).
2. To turn the vacuum off, push the pedal again.
The handle on this vacuum cleaner can be set to one of three positions –
upright, middle or low.

How to Adjust the Handle

1. To release the handle, step on the handle release pedal on the left side of
the vacuum cleaner nozzle from the user's perspective and pull back the
handle (Fig.1).
2. Upright position – for storage or when cleaning tools are used (Fig. 2). Handle
locks in this position.
3. Middle position – for normal cleaning (Fig. 3).
4. Low position – for cleaning under furniture (Fig. 4).
Fig. 2
How to Adjust the Handle
Fig. 2
Fig. 3
5
Fig. 1
Fig. 3
Fig. 1
Fig. 4