Installing Nokia Metrohopper Outdoor Unit; Mounting The Alignment Bracket On A Pole - Nokia MetroHopper User Manual

4
Installing Nokia MetroHopper outdoor
unit
This chapter gives instructions for installing and uninstalling the Nokia
MetroHopper outdoor unit.
4.1

Mounting the alignment bracket on a pole

To install the alignment bracket on a pole:
1.
2.
3.
4.
DN99592289 © Nokia Networks Oy
Issue 2-1 en
Place the bracket and the clamp around the pole. The diameter of the pole
may vary from 30 to 120 mm. Diameters over 120 mm require the use of
an adapter.
Align the bracket roughly towards the far end.
Tighten the mounting bolts with the 6 mm Allen key.
Tighten the bolts to 17 − 20 Nm with a torque wrench.

Installing Nokia MetroHopper outdoor unit

13 (26)