Table of Contents
Advertisement
To view or change unit identifications, click Transmission / FXC RRI →
Identifications, and select the required unit. A window detailing the
identifications of the selected unit will open.
To view or change unit settings, click Transmission / FXC RRI → Settings, and
select the required unit. A window detailing the settings of the selected unit will
open.
Any changes you make are sent to the node as you click on the OK or Apply
button of the dialog in question.
2.4.1
Identifications
User defined identifications for a network element or a unit include, for example,
notes on the installation. Identifications used in alarm display can also be
changed. Some of the information (such as the serial number of the product)
cannot be altered, because it is read directly from the equipment.
To change the identifications of a functional entity, type the desired identification
information in the text box.
2.4.2
Unit settings
Flexbus 1 and Flexbus 2
Click Transmission / FXC RRI → Settings, and select Unit. The Unit settings
dialog box will open. Select the required Flexbus interface. In these windows you
can enable or disable Flexbus interfaces and set the appropriate capacity. Note
that with Nokia MetroHopper the capacity is fixed to 4 x 2 Mbit/s. You can also
switch the OU power feed on or off.
To enable/disable a Flexbus interface, select or clear the In Use checkbox.
To set the OU power supply on/off, select the appropriate option.
2.4.3
Outdoor unit settings
Click Transmission / FXC RRI → Settings, and select either Outdoor unit 1 or
Outdoor unit 2. The corresponding MetroHopper settings dialog box will open.
Transmitter mode
The possible values for Transmitter mode are Operating, Forced transmit,
Receiving only, and Commissioning. Note that it is not possible to switch to
certain modes at all times.
14 (42)
© Nokia Networks Oy
Commissioning and Maintenance
DN99611394
Issue 2-0 en
Advertisement
Chapters
Table of Contents
