Nokia MetroHopper User Manual page 109

To uninstall a radio:
1.
2.
3.
4.
5.
6.
To uninstall an alignment bracket:
•
•
22 (26) © Nokia Networks Oy
Turn the power supply to the OU off with Nokia Hopper Manager (Refer
to Commissioning and Maintenance for more information).
Disconnect the Flexbus cable (see Section 5.2).
Disconnect the grounding wire (see Section 5.1).
Disconnect the synchronisation cable, if in use (see Section 5.3).
Open the M6 screws of the alignment bracket with 5 mm Allen key (see
Section 4.7).
Remove the radio section from the alignment bracket.
In case of pole installation, open the mounting bolts with 6 mm Allen key
and remove the alignment bracket from the pole.
In case of wall installation, open the wall bolts with a suitable tool and
remove the alignment bracket.
Installation
DN99592289
Issue 2-1 en