Display Section - Sharp MD-X8 Operation Manual

DISPLAY SECTION

WWWC O N T R A S T WA D J U S T
WWWWWWWWWWWWWWWWWWWWW
WWWWWWWWWWWWWWWWWWWWW
M I N . WWWWWWWWWWWWWM A X .
Lighten
Standard character display
M D 1 2
B E S T H I T S
WWW 1 L O V E
WWW 2 WA V E
WWW 3 F O R
Extra large character display
M DWWW 1 2
B E S T WH I T S
*01-16
DISPLAY
Darken
MULTI CONTROL
Lighten
WWW
Darken
WWW 5 5 : 0 8 T O T A L
WWWWWWW
S O N GWWWWWWW
WWWWWWWWWWWW
E V E RWWWWWWWW
WWW 5 5 : 0 8 W T O T A L
DISPLAY
8
H H H H H To change the contrast of the display
1
Turn the power on, and hold down the DISPLAY button for
more than 0.5 seconds.
2
Press the MULTI CONTROL button to change the contrast.
I The contrast is adjustable in 16 steps.
I If no operation is performed for 10 seconds or more, the unit will return
to the original screen.
I If you operate your personal computer using a separately available
sound card, you cannot adjust the contrast.
H H H H H Character display
You can select a standard character display or an extra large
character display for the display on this product.
I Standard character display
The default display mode set at the factory.
Track names are displayed on 4 lines so that you can check several
track names at the same time.
I Extra large character display
When track names are displayed using extra large characters, you
can read the names at a distance.
H H H H H To change the size of the characters
(extra large character display)
Turn the power on while the MD is in the stop mode, and press
the DISPLAY button.
I If the DISPLAY button is pressed again, the characters will return to
their original size.
8
98.6.23, 10:29 AM