Sharp MD-X8 Operation Manual page 46

(Continued)
H H H H H Connecting analog units
If any of a variety of analog audio sources are connected to this unit, you can make analog recordings.
POWER
Notes
I When audio input and output signals of an external unit are connected to this unit, oscillation may occur. In such a case, disconnect either the input
or output connection.
I When you use the MD 0 MD EDIT function, the analog signal is recorded.
H H H H H Headphones
I Be sure that your headphones have a 1/8" (3.5-mm) diameter plug
and between 16 ohms and 50 ohms impedance. The recommended
impedance is 32 ohms.
I When headphones are connected, the speakers are disabled auto-
matically. Adjust the VOLUME control for the desired volume.
38-58
RIGHT LEFT
ANALOG IN/OUT
RIGHT LEFT
OUT
AUX 2
IN
RIGHT LEFT
GND
PHONO
RIGHT LEFT
RCA cord
RIGHT LEFT
Output jack
Stereo
turntable
A proprietary cable for MD
(AD-M4AC, available separately)
A 3.5 mm stereo
MD IN/AUX1
mini-plug cable
45
RIGHT LEFT
RCA cord
To the output/headphone jack
MD EDIT
To the output/headphone jack
To the output/headphone jack
45
98.6.23, 10:34 AM
LEFT RIGHT
Analog output jack
Analog input jack
LEFT RIGHT
The other MD/CD player
A portable MD player corresponds
with the MD MD EDIT function.
The other MD/CD player
PHONES