Sharp MD-X8 Operation Manual page 25

(Continued)
MD
C D
or
*22-26
MD
CD
1 2 3
P-MODE
TIME
CD
1 6 5 6 : 1 3 T O T A L
D I S C 1
S T O P
24
H H H H H Repeat and random play
An entire disc, a single track, or a programmed sequence
can be continuously repeated.
1
Select the desired program source, CD or MD, by pressing the
CD H or MD H button.
2
Press the P-MODE button.
I Each time this button is pressed, the mode will change in the following
order:
Repeat play Random play
3
Press the 06 button to start playback.
I When all of the tracks have played in random order, the unit will stop
automatically.
To stop playback:
Press the CD H or MD H button.
To cancel repeat playback or random play:
Press the P-MODE button until the R or "RANDOM" display
disappears.
I When you open the disc tray or a MiniDisc is removed, repeat play or
random play mode will be canceled.
To repeat playback of selected tracks:
Enter the program for the tracks you want and start repeat play.
You can program a single track and play it repeatedly.
Note:
I During APMS play, random play is not possible.
When more than one CD is inserted:
When you press the CD PLAY 06 button ...
I All of the CDs in the unit will be played repeatedly or randomly.
(Playback will continue until the unit is stopped.)
When you press the CD PLAY buttons ( 1 - 3 ) :
Only tracks from the selected CD will be played repeatedly or
randomly.
I When all of the tracks have been played in random order, the unit will
stop. (None of the tracks is played twice.)
24
98.6.23, 10:31 AM
Normal play