Qsonica Sonicator Q2000 Operation Manual page 29

Using the numeric keys set the OFF portion of the cycle, then press the
ENTER/REVIEW key.
For example, to enter a value of 15 seconds OFF, first depress the
and then depress the
TEMPERATURE: The temperature function prevents overheating of the sample by
continuously monitoring the sample temperature, and terminating the ultrasonics when
the temperature reaches a predetermined setpoint. The ultrasonics is automatically
reinstated when the temperature drops below the setpoint. If the temperature of the
sample must be monitored and/or controlled, insert the optional temperature probe
forcefully into the small jack on the rear panel, immerse the temperature probe in the
sample and press the
For example, the screen will display (or whatever the sample liquid temperature is):
Using the numeric keys set the high temperature limit (setpoint), then press the
ENTER/REVIEW key.
For example, to enter a value of 35 degrees for the temperature set point, first depress
the 3 key, then the 5
Press the ENTER/REVIEW
ENTER/REVIEW key.
The screen will display:
TIME 0:15:00
PULSE 30 : 15
TEMP key.
Probe Temperature 27°C
Temperature Setpoint __°C
key.
The screen will display:
Probe Temperature 27°C
Temperature Setpoint 35°C
key.
The screen will display:
TIME 0:15:00
PULSE 30 : 15
TEMP __ __C
AMPL 40 %
TEMP 35C
AMPL 40 %
29
1 key, then the 5 key