Functions Of Controls, Indications, And Connectors - Qsonica Sonicator Q2000 Operation Manual

FUNCTIONS OF KEYS, CONTROLS, INDICATORS AND CONNECTORS
SCREEN
0-9 key
CLEAR key
ENTER/REVIEW
key
TIMER
key
TEMP
key
PULSER
key
ENERGY key
START/STOP key
PAUSE key
SAVE/RECALL
key
AMPL key
| key
O key
▲▼ key
FRONT PANEL
Displays prompts and the following control parameters:
Amplitude selected

Output power delivered to the probe in watts and as

percentage of the total power
Selected duration of processing

Actual processing time

Elapsed time

Set and read temperature

Pulse duration

Amount of energy (Joules) delivered to probe.

Input digits.
Clears preceding entry.
Enters data into the program, and selects various parameters
for display on the LCD screen.
Used to set the duration of ultrasonic application – from 1
second to 9 hours, 59 minutes, 59 seconds.
Used with the numeric keys to set the high temperature limit
– from 1°C to 99°C. Red indicator lights when the
temperature limit has been reached. (optional temperature
probe must be used for this feature)
Used with the numeric keys to set the pulse mode. The ON
cycle and OFF cycle can be set independently from 1 second
to 59 seconds. Red indicator lights when pulser is in the OFF
portion of the cycle.
Used to set the Energy Setpoint
Starts or stops the ultrasonics. Red light indicates sonication.
Suspends operation. Red light indicates Pause mode.
Used with the numeric keys to assign a number to a program
and store it in memory. Up to 9 programs (1-9) can be
stored. Also used to recall any of 9 stored programs.
Controls the amplitude (intensity) of vibration at the tip of the
probe.
Switches the main power ON.
Switches the main power OFF.
Used with the AMPL key to increase/decrease amplitude.
To accomplish this task, depress the AMPL key to display the
percentage of amplitude previously selected, then depress
the ▲ or ▼ key as required
23