Turning The Boiler On And Off; Settings Menu - Alde Compact 3020 HE Operating Instructions Manual

3. TURNING THE BOILER ON AND OFF
The control panel and the
boiler are switched off.
4. STANDBY
NB. The screen goes out when it enters standby mode if the background lighting is set at dark, but comes
on if the screen is touched. See settings under section 7:1 point 8.
D E F G H I J
C 22°C
B
6°C
A
Fri 18.30
L
K
5. SETTINGS MENU
Launch the settings menu by pressing the MENU button. The backlighting comes on and those functions
that can be set are displayed. Settings that you make are automatically saved after 10 seconds. The con-
trol panel will go to standby automatically after 30 seconds if the screen has not been touched.
The control panel in standby mode.
22°C
6°C
Fri 18.30
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle
4
manufacturer's instructions.
The control panel and the
boiler are switched on.
3020
High Efficiency
A. Clock. The clock shows the day and
time (if activated). To set the clock,
see under section 7:1 point 4.
B. *Outdoor temperature.
C. Indoor temperature.
D. Circulation pump. The symbol is
displayed when the pump is in
operation.
E. Automatic start of the boiler.
The symbol is displayed when the
function is activated in accordance
with section 7:1 point 18.
F. Day auto. The symbol is displayed
when the function is activated.
G. *LPG bottle full/empty. The sym-
bol is displayed when the sensor
on DuoControl is connected and
activated. If EisEX is installed,
the symbols for the mode set are
displayed along with the bottle
symbol:
Snowflake
= EisEX on
Sun
= EisEX off
The control panel showing the settings menu.
+22°C
1 kW
1. To start the boiler, press the On/
Off button and the start-up display
appears. The boiler starts with the
last selected settings.
2. To switch off the boiler, press the
On/Off button.
H. Night auto. The symbol is displayed
when the function is activated.
I. High altitude mode. The symbol
flashes if the high altitude mode is
activated.
NB. If an additional hot water tank
(*Alde Flow part no. 3020 160)
and the panel is in more hot water
mode, the symbol below is displayed
instead of the high altitude symbol.
J. 230 volt. The symbol is displayed
when 230 V is connected to the
boiler.
K. On/Off button. Main switch for
boiler.
L. MENU button. Button for settings
menu.
For activated functions, see section 6.
For the tools menu, see section 7.
is installed