Table of Contents
Advertisement
Using GyroRemote
On-screen Display
GyroRemote
Inside the upper cover
All Button Assign selections
: ASSIGN Select button
E-33
Button Assign list
Function (1)
Function (2)
RIGHT-CLICK/UNDO
LEFT-CLICK/ENTER
Function (3)
Function (4)
ASSIGN Select
: LEFT-CLICK/ENTER button
Function ASSIGN
1
Open the upper cover on the front of GyroRemote.
2
Press ASSIGN Select.
"Button Assign" list appears on the lower right of the
display. Each time you press ASSIGN Select,
"Button Assign" list changes as shown below.
1/5
2/5
3/5
• Press ASSIGN Select. After the "Button Assign" list pops up press
LEFT-CLICK/ENTER to view a list of all selections. Refer to the list
of all Button Assign selections below.
3
Press Function (1–4) and select the desired item.
4
Press UNDO. The "Button Assign" list display
disappears.
• The Button Assign function is not recorded on the GyroRemote
itself, it is recorded on the projector side.
: RIGHT-CLICK/UNDO button
4/5
5/5
Advertisement
Table of Contents
