Deselecting Inputs; Selecting The Transmission Speed (Rs-232C) - Sharp XG-P20XU Operation Manual

Sharp operation manual lcd projector xg-p20xu

Hide thumbs Also See for XG-P20XU:

Table of Contents

Deselecting Inputs

This function allows you to deselect unwanted signal input. See page

for the procedure details.

• When stack projecting, multi-screen projecting and so on, this function can be used to cancel the RS-232C control.

• Up to two input signals can be blocked for both Input 1, 2, 3 or Input 4, 5.

• For details on intended purpose, see pages

and

This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the

baud rate. See page

for the procedure details.

• Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual

for instructions for setting the baud rate.

E-59

Table of Contents

Xg-p20xul Conference seriesConference xg-p20xu