Table of Contents
Advertisement
Watching Video Images
Connecting to a VCR, laser disc player and other audiovisual
equipment using the standard video Input
2
1
Connect the yellow RCA connectors to the corresponding yellow VIDEO INPUT 4 terminal on the projector and
the Video output terminal on the video source.
2
To use the built-in audio system, connect the red and white RCA connectors to the corresponding red and white
AUDIO INPUT 4/5 terminals on the projector and the Audio output terminals on the video source.
The S-VIDEO INPUT 5 terminal uses a video signal system in which the picture is separated into a color and a luminance signal
to realize a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT 5 terminal on the projector. S-video cable is sold separately.
• If your video equipment does not have an S-video output terminal, use a composite video cable.
CAUTION
• Always turn off the projector before connecting to video equipment, in order to protect both the projector and the equipment
being connected.
E-17
S-video cable (sold separately)
Video cable (sold separately)
1
Audio cable (sold separately)
To S-video output terminal
To video output terminal
To audio output terminals
Example
VCR
or
Laser disc player
Advertisement
Table of Contents
