Sharp Projector Remote Control Setup Manual page 5

4.0 On SWITCHER (Console #1) [see Image below and Figure Bl
Figure B
CPUl CPU2 VCR1 VCR2 LDP1
Power
PROJ1 PROJ2 PROJ1 PROJ2
CPU CPU VIDEO VIDEO
Audio
output
4.1 Power should be ON (button lit).
4.2 Deselect all buttons under the labels CONTROL and I/O (lights above
4.3 Under the label I/O, Select the button RGBS (light should come on).
4.4 Select button CPU1 or CPU2 (red light should come on).
4.5 If any green lights come on elsewhere on the switcher, deselect those
4.6 Select button above label for projector output to be used for computer
PROJ1 CPU button is for the projector nearest the classroom door.
buttons should be OFF).
buttons.
image projection: (Proji CPU or Proj2 CPU).
Control
Enter Preset View Esc
I/O
RGBS Audio