Sharp Projector Remote Control Setup Manual page 23

for it to cool down and can be turned back on when you see a solid red light on the
projector.
To temporarily turn projector off, press BLACK SCREEN on the remote.
Projector will turn itself back automatically in 10 minutes, or when you press
BLACK SCREEN again.
***lf AUDIO OUTPUT from the workstation is needed, then you will have to use the
speakers kept in the storage basket on the cart.
4.0 Clean up
4.1 Power OFF to Projector. You will need to press either the projector's power button or
the one on the remote, followed by turning off the back power button.
4.2 Power OFF to computer.
4.3 Disconnect all cables. Make sure that the projector's remote and the black SHARP
MONITOR cable stay on the projector cart.
23