Sharp Projector Remote Control Setup Manual page 15

computer, either PROJ1/CPU, PR0J2/CPU, or BOTH). If needed, you can also
use the Switcher to output sound from a computer.
Figure C
Switcher
CPUl CPU2 VCR1 VCR2 LDP1
Power
PROJ1 PROJ2 PROJ1 PROJ2
CPU CPU VIDEO VIDEO
Audio
output
3.1 Power should be ON (button lit).
3.2 Deselect all buttons under the labels CONTROL and I/O (lights above
3.3 Under the label I/O, Select the button RGBS (light should come on).
3.4 Select button CPU1 or CPU2 depending on which wall jack the
3.5 If any green lights come on elsewhere on the switcher, deselect those
3.6 Select button above label for projector output to be used for computer
• PROJ1 CPU button is for the projector nearest the classroom door.
• PROJ2 CPU button is for the projector nearest the windows.
buttons should be OFF).
computer is connected to (red light should come on).
buttons.
image projection: (Proji CPU or Proj2 CPU).
Control
Enter Preset View Esc
15
I/O
RGBS Audio