Dhcp Client Setting; Tcp/Ip Setting; Confirming The Projector Information - Sharp Notevision XG-C435X-L Operation Manual

2

2 DHCP Client Setting

2
2 2
Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
Selectable items
On Obtains configuration parameters for
TCP/IP network automatically.
Off Sets the TCP/IP manually.
Select "On" for "DHCP Client". "Obtaining IP
Address..." appears, then the menu screen appears.
Confirm the parameters of IP Address, Subnet Mask
and Gateway on the TCP/IP screen.
If the DHCP server is not available, "Could not
obtain IP Address." appears.
In this case, set the TCP/IP manually. (See the item
3.)
3

3 TCP/IP Setting

3
3 3
Set the TCP/IP manually.
1
Select "Off" for "DHCP Client", then
press ENTER.
2
Select "TCP/IP", then press ENTER.
3
Enter "IP Address" using '
and \, then press ENTER.
Setting the TCP/IP
1 9 2 .
IP Address
2 5 5 .
Subnet Mask
0 0 0 .
Gateway
4
Enter "Subnet Mask" using '
| | | | | and \, then press ENTER.
5
Enter "Gateway" using '
\, then press ENTER.
Description
' ' ' ' , " " " " " , | | | | |
Network
1 6 8 . 1 5 0 . 0 0 2
2 5 5 . 2 5 5 . 0 0 0
0 0 0 . 0 0 0 . 0 0 0
' ' , " ' ' " " , " "
' ' , " ' ' " " " " , | | | | | and
Menu operation
Selectable items
IP Address Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Subnet Mask Factory default setting:
255.255.255.000
Set the subnet mask to the same as
that of the computer and equipment on
the network.
Gateway Factory default setting: 000. 000. 000.
000
* When not in use, set to "000. 000.
000. 000".
Note
• Confirm the existing network's segment (IP ad-
dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If "192.168.150.002"
is not used in a network with an IP address of
"192.168.150.XXX", you don't have to change
the projector IP address.
• For details about each setting, consult your
network administrator.
4 4 4 4 4
Confirming the
Projector Information
You can confirm the MAC address and projector
name.
Displayed items
MAC Address The MAC address of the projector is
displayed.
Projector The projector name is displayed.
Note
• For information on how to change the projector
name, see "SETUP MANUAL" contained in the
supplied CD-ROM.
Page 43
Description
Description
-55