Part Names And Functions - Sharp Notevision XG-C435X-L Operation Manual

Part Names and Functions

Numbers in refer to the main pages in this operation manual where the topic is explained.
Projector
Top View
Power indicator
STANDBY/ON button
For turning the power on and
putting the projector into
standby mode.
KEYSTONE button
For entering the Keystone
Correction mode.
Adjustment buttons
('/"/\/|)
For selecting and adjusting
on-screen items.
RETURN button
For returning to the previous
display.
INPUT buttons
For switching input mode.
Front View
Zoom knob
For enlarging/
reducing the picture.
31
Tilt dial
31
Height Adjustment
button
31
Adjustment foot
Push both sides of the lens cap to
attach or remove.
Attaching the lens cap
After putting the lens cap strap on the lens
cap, pass the other end of the strap
through the hole on the front side of the
projector, next to the lens, as shown in
the illustration.
-12
30·59
30
32
43
43
34
33
30·59
Lamp indicator
59
Temperature warning
indicator
35
AUTO SYNC button
For automatically adjusting
images when connected to
a computer.
44
ENTER button
For setting items selected
or adjusted on the menu.
34
Volume buttons
For adjusting the speaker
sound level.
43
MENU button
For displaying adjustment
and setting screens.
35
ECO+QUIET button
For lowering the noise of the
cooling fan and extending the
lamp life.
33
Focus ring
For adjusting the focus.
51
Speaker
15
Remote control
sensor
31
Height Adjustment
button
31
Adjustment foot
56·57
Air filter/Intake vent
(on the bottom of the projector)