Screen Adjustment ("Scr-Adj" Menu); Setting The Resize Mode; Adjusting The Image Position; Keystone Correction - Sharp Notevision XG-C435X-L Operation Manual

Screen Adjustment ("SCR-ADJ" Menu)

Pict. SIG
1
Resize
2
Image Shift
H-Keystone
3
V-Keystone
Auto V-Keystone
4
OSD Display
5
Background
6
Menu Position
7
PRJ Mode
8
Language
SEL./ADJ.
RETURN
1 1

1 Setting the Resize Mode

1 1
Note
• For details of the Resize mode, see pages
and 38.
• You can also press RESIZE on the remote con-
trol to set the resize mode. (See page 37.)
2 2

2 Adjusting the Image Position

2 2
You can move the projected image vertically.
\ \ \ \ \ button
Note
• This function only works in some RESIZE
modes. (See pages 37
• To reset this function, select "0".
SCR-ADJ PRJ Net.
Normal
0
0
0
On
On
Logo
Center
Front
English
ENTER
END
37
| | | | | button
and 38.)
Menu operation

3 Keystone Correction

3 3
3 3
When the image is projected either from the top or from
the bottom towards the screen at an angle, the image be-
comes distorted trapezoidally. The function for correct-
ing trapezoidal distortion is called Keystone Correction.
Auto V-Keystone Correction
Set "Auto V-Keystone" on the "SCR-ADJ" screen
menu to "On".
Manual Keystone Correction
Set "Auto V-Keystone" on the "SCR-ADJ" screen
menu to "Off". Select "V-Keystone", and then
press \ \ \ \ \ or | | | | | to parallelize the left and right sides
of the projected image with the slide bar. To
parallelize the upper and lower sides, select "H-
Keystone" and press \ \ \ \ \ or | | | | | .
Vertical Keystone Correction
Horizontal Keystone Correction
Note
• The Keystone Correction can be adjusted up to
an angle of approximately ±12 degrees with "Auto
V-Keystone" and up to an angle of approximately
±50 degrees with "V-Keystone" and approxi-
mately ±30 degrees with "H-Keystone".
• When the screen is slanting or the image is de-
teriorated, set "Auto V-Keystone" to "Off".
Page 43
-49