Selecting The Economy Mode; Setting The Power Save Mode; Monitor Out/Rs-232C Off Function - Sharp Notevision PG-C45S Operation Manual

Selecting the Economy Mode

These functions allow you to reduce the power consumption of the projector.
Setting the Power Save
Mode
Select "Power Save" in "Economy
Mode" under the "Options (1)" menu on
the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
• Although lamp life and noise are improved
when "Power Save" is set to "ON", bright-
ness decreases by 20%.
• "Power Save" mode is factory preset to
"OFF".
Monitor Out/RS-232C
Off Function
This projector consumes power when using a
monitor connected to the OUTPUT (INPUT 1,
2) terminal and a computer connected to the
RS-232C terminal. When not using these ter-
minals, "Mntr.out/RS232" can be set to "OFF"
to reduce standby power consumption.
Select "Mntr.out/RS232" in "Economy
Mode" under the "Options (1)" menu on
the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Monitor Out/RS-232C connection
ON
is set to "ON".
Monitor Out/RS-232C connection
OFF
is set to "OFF".
Note
• Set "Mntr.out/RS232" to "ON" when using
the Sharp Advanced Presentation Software.
Status Brightness
ON
80%
(Low power
mode)
OFF
100%
(Standard
mode)
Power
Lamp Life
consumption
290 W 2,000 hours
340 W 1,500 hours
-69