Selecting The Economy Mode; Setting The Power Save; Rs-232C Off Function - Sharp XV-Z12000 Operation Manual

Revers
Selectin
This projecto
invert the pr
These functio
Selecting the Signal Type
Setting the Projection
Mode
This function allows you to select the input signal type RGB or Component for INPUT 1 and
D Off Function
2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component,
Select "PRJ Mode" in the "Options"

Setting the Power Save

Analog RGB or Analog Component for INPUT 5.
menu on the menu screen.
➝For operating the menu screen, see
(indicators) on the projector can be turned off when they are disturbing the projection.
Select "Power Save" in "Economy
pages 42 to 45.
Mode" under the "Options" menu on the
menu screen.
• "Power Save" is switched "ON" and
Selected Item
"OFF" by pressing
Front
ning LED off Selecting the Signal
➝For operating the menu screen, see
on controls the quantity of the projected light and the contrast of the image. It can
Ceiling + Front
Type
pages 42 to 45.
d using the IRIS button on the remote control.
t "LED" in the "Options" menu on Rear
Selected Item
enu screen.
Ceiling + Rear
Select "Signal Type" in the "Options"
SIDE BAR
operating the menu screen, see
(ON/Low Although noise is reduced when
480I
menu on the menu screen.
480P
Power mode) "Power Save" is set to "ON",
42 to 45.
576I
➝For operating the menu screen, see
576P 960
brightness decreases by 20%.
NTSC
ing HIGH
pages 42 to 45.
PAL
(OFF/ "Power Save" mode is factory
SECAM Note
cted Item Description
TNESS MODE/ Standard mode) preset to "OFF".
480P 960
N) LEDs are turned on. • This function is used for the reversed im-
720P
FF) ONTRAST MODE
age and ceiling-mount setups. See page
LEDs are turned off while the
Note
32 for these setups.
projector is in operation.
1080I
For INPUT 1 and INPUT 2
(LEDs turn on while the pro-
" during 720P input when viewing 720P output from a computer.
on the remote control to
Set when RGB signals are
en "STRETCH" and "DOT BY DOT". "STRETCH" is fixed when 1080 jector is in the standby mode,

RS-232C Off Function

desired mode.The mode
RGB received from video equip-
warming up or indicating
ment.
d in the order of "HIGH
This projector consumes power when using a
SIDE BAR SMART STRETCH
problems.)
computer connected to the RS-232C terminal.
Set when analog component
ESS MODE", "MEDIUM
When not using these terminals, "RS-232C
Component signals are received from
nd "HIGH CONTRAST
Port" can be set to "OFF" to reduce standby
video equipment.
Note
power consumption.
en Auto Power Off function is set to
Select "RS-232C Port" in "Economy
For INPUT 5
Mode Description
FF", "LED" is set to "ON" automatically.
Mode" under the "Options" menu on the
Set when digital PC RGB
High brightness is
sure to set Auto Power Off function to
menu screen.
HTNESS
D. PC RGB signals are received from
given priority over
N" to use LED Off function. (See page
• "RS-232C Port" is switched "ON" and
E
the computer.
)
high contrast.
"OFF" by pressing
Set when digital PC com-
Intermediate mode
➝For operating the menu screen, see
ponent signals are re-
UM
D. PC Comp.
between high contrast
pages 42 to 45.
ceived from the com-
E
and high brightness
puter.
playing the Lamp Usage Time
Selected Item
High contrast is given Set when digital video
(ON) RS-232C connection is set to "ON".
TRAST
RGB signals are re-
priority over high
The RS-232C is operating at all
D. Video RGB
E
ceived from video equip-
times (to accept communications).
brightness.
ment.
(OFF) RS-232C connection is set to
Set when digital video
"OFF". RS-232C does not
component signals are
operate when the power supply
D. Video Comp.
is in standby. received from video
equipment.
nfirming the Lamp
Set when analog RGB
Downloaded from ProjectorsManual.com Manuals
tor is set to the "HIGH BRIGHT- A. RGB Note
age Time
signals are received.
itle" only move when in the "SMART STRETCH" and "CINEMA ZOOM" modes.
DE" when shipped from the fac-
• Set "RS-232C Port" to "ON" when using the
Description
.
Normal image
Inverted image
Reversed image
Description
SMART CINEMA
Reversed and inverted image
STRETCH ZOOM
720 1280 720 1280 720
720 1280 720 1280 720
Ð Ð Ð
Ð Ð Ð
Output screen image
CINEMA ZOOM STRETCH
* *
* *
.
* *
Description
For INPUT 1 and INPUT 2
STRETCH DOT BY DOT
Status
1280 720 Ð
Front
ON
(Low power mode)
1280 720 Ð
For INP
OFF
1280 720 1280 720
(Standard mode)
1280 720 Ð
I
signal is entered.
DOT BY DOT
IRIS button
RGB/COMP. button
Lamp power
Brightness
Ceiling+Front Rear
consumption
80% 220 W
100% 270 W
Ceiling+Rear
-7