Setting The Video System - Sharp Notevision PG-C45S Operation Manual
Sharp lcd projectors operation manual
Hide thumbs
Also See for Notevision PG-C45S:
- User manual (2 pages) ,
- Quick start reference sheet (5 pages)
Table of Contents
Advertisement
Setting the Video System
The video input system mode is preset to "Auto"; however, a clear picture from the con-
nected audio-visual equipment may not be received, depending on the video signal differ-
ence. In that case, switch the video signal.
Setting the Video
System
Select "Video System" in the "Options
(1)" menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to
45.
Note
• The video signal can only be set in IN-
PUT 3 or INPUT 4 mode.
• In "Auto", images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
-66
-66
PAL
When connected to PAL video equipment.
SECAM
When connected to SECAM video
equipment.
NTSC4.43
When reproducing NTSC signals in
PAL video equipment.
NTSC3.58
When connected to NTSC video equipment.
Advertisement
Table of Contents
Need help?
Do you have a question about the Notevision PG-C45S and is the answer not in the manual?