OPERATION METHOD
Locking block
Hose connector
Release the locking levers to
open-up the housing, take out
the wheels and accessories
1. Install castor wheels into the hole on the base.
2. Install the big wheel into the relevant position and
then fix the wheel with screw.(Please kindly keep the
mark on the big wheel ("R" or "L") same as the one
("R" or "L") on wheel base.
Assemble the metal handle as shown in image - N.B.
The HYVI32 does not have a handle.
Put the hose connector into ①, the suction
function is available
Put the hose connector into ②, the blow
function is available
Page 5