Page 1
WET - DRY VACUUM HYVI75-2 User manual FOR YOUR SAFETY You must Read and understand this manual before use. Keep this manual for future reference.
SAFETY DIRECTIONS IMPORTANTSAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following; READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING To reduce the risk of fire, electric shock or injury; • Do not use outdoors. •...
OPERATION METHOD Insert the hose connector into the hose socket Hose connector socket Hose connector Handle Insert the handle into the tube with a twisting force Extension tube Insert the handle into the tube with Extension tube a twisting force Page 5...
Page 6
OPERATION METHOD Extension tube Insert the handle into the tube with a twisting force Floor brush Tube storage PLEASE NOTE We have included larger accessories with this vacuum more suited for higher domestic and industrial cleaning. These attachments will not fit in the Tube Storage locations.
Page 7
OPERATION METHOD Hold the plug and insert into socket ON/OFF Switch Press the switch button to turn ON/OFF the cleaner NOTICE: It is not allowed to turn ON both switches at the same time, they must be turned on one by one. For safety there is a waterproof cover this must be replaced if it becomes torn or damaged You can adjust the airflow by...
Page 8
TO REPLACE DUST BAG When the dust barrel is full you must empty it as soon as possible Release the locking lever to open-up the housing Empty the dust barrel Take out Drain liquid Page 8...
MAINTENANCE WARNING; When the filters and covered with dust or the suction decreases considerably, please clean the filters. This will improve the working efficiency and extend the life of the cleaner. NEVER use the machine without filters Twist the locking knob with an anti-clockwise force and take off the filters Sponge filter Clean filter carefully...
INSTALLATION INSTRUCTIONS Locking Wheel Support Washer tube Cover Attach the large wheel to the support tube, place the washer, then fix it with the locking pins, finally cover the wheels with their respective covers. (The method of installation is the same for both sides. Lock nut Lock nut Casters...
Wet dry floor brush – Stainless steel extension tube – Crevice nozzle – Dusting brush DECLARATIONS of CONFORMITY Genpower Ltd confirms that this Hyundai product conform to the following CE Directives; 2006/42/EC Machinery Directive 2004/108/EC EMC Directive 2006/95/EC Low Voltage Directive...
Page 12
Seoul 03143, Korea, GENPOWER LTD Post Code : 03143 IsaacWay,LondonRoad Pembroke Dock, UNITED KINGDOM, SA72 4RW T: +44 (0) 1646 687 880 F: +44 (0) 1646 686 198 Copyright 2016 HYUNDAI Corporation All rights reserved. Made in P.R.C E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk...