Kogan KA9FUNOVENA Instruction And Installation Manual page 8

Installation Instructions Continued
WARNING. The installation must be carried out by a suitably qualified and licensed
WARNING.
person and in accordance with the current standards.
The installation must be carried out by a suitably
qualified and licensed person and in accordance with
•
the current standards.
• The oven is manufactured to work with three-
phase alternating current (220V-240V/50Hz). The
•
REMEMBER:
connection diagram is also found on the cover of the
connection box.
•
Remember:
WARNING. Remember to connect the safety circuit to the connection box terminal
• The connection wire should match the connection
marked with . The electricity supply for the oven must have a safety
type and the power rating of the oven.
switch which enables the power to be cut off in the case of an emergency.
• The connection cable must be secured in a strain-
The distance between the working contacts of the safety switch must be
relief clamp.
at least 3mm.
Before connecting the oven to the power supply it is important to read
the information on the data plate and the connection diagram.
CONNECTION DIAGRAM
Caution!Voltage of heating elements 220V～240V
For 220V 240V
～
connect on:L (Brown wire) connect
to 3 and N (blue wire)connect to 5,
safety wire (Yellowgreen) connectto
PE terminal
The oven is manufactured to work with three-phase alternating current
(220V-240V/50Hz). The connection diagram is also found on the cover of
the connection box.
The connection wire should match the connection type and the power
rating of the oven.
The connection cable must be secured in a strain-relief clamp.
PE terminal
earthed one phase
FITTING GUIDELINES
WARNING.
Remember to connect the safety circuit to the
connection box terminal marked with
supply for the oven must have a safety switch which
enables the power to be cut off in the case of an
emergency.
The distance between the working contacts of the
safety switch must be at least 3mm.
Before connecting the oven to the power supply it is
important to read the information on the data plate and
the connection diagram.
10
8
. The electricity
L
5