Selection Of Function - Sharp AR-350 Operation Manual

Using the touch panel
I How to use the touch panel
[Example 1]
SETS / PR
JOB QUEUE
COPY 003 / 00
SHANE COFFEY 003 / 00
054234 010 / 00
Beep
CLIFF QUIROGA 003 / 00
tone
[Example 2]
1/13
COMPLETE
The beep tone of key touch can be disabled by a
key operator program. (See page xxxx of the Key
Operator's guide.)
The touch panel (display) illustrated in this operation
panel is a conceptual illustration.
You can easily set or
cancel a function by
touching a key on the
display with a finger. The
touch panel operation can
be confirmed with a beep
tone and highlighted
display.
If any key is disabled on
each screen, the key is
displayed gray. If you
press the key, two short
beeps will be sounded.
PART NAMES AND FUNCTIONS
I Selection of function
[Example 1]
If any key is highlighted in the initial setting of each
setting screen, the function will be registered when
you touch the [OK] key without additional operation.
[Example 2]
DUAL PAGE
COPY
MULTI SHOT
Copier feature
Dual page copy
B/W reverse
Rotation copying in
two-sided copying
Centering
[Example 3]
DUAL PAGE
COPY
MULTI SHOT
DUAL PAGE
COPY
MULTI SHOT
1
When using the copier
feature or the facsimile
feature, the functions
shown below which can
be set by only touching
the relevant key in the
special feature screen
can be canceled by
touching the key again
(canceling highlighted
display).
Facsimile feature
Polling
Own number print
Page cutoff
When using the copier
feature or the facsimile
feature, if a special
function is set, the
corresponding function
icon will appear. If this
icon is touched, the
setting screen of the
function (or a menu
screen) will appear,
allowing the settings to be
checked or adjusted and
the function to be
canceled easily.
1-17