Saddle Stitch Finisher; Specification - Sharp AR-350 Operation Manual

SADDLE STITCH FINISHER

If the saddle stitch finisher is installed, the offset function that stacks each set offset and the saddle stitch function that
staples automatically at the center of paper and folds paper in two can be used. Also punching can be performed on
printed paper if a punch unit is installed as a peripheral unit.
Part names
Stapler compiler
Paper to be stapled is stacked
temporarily.
Offset tray
The offset function and the
stapling function can be used only
in this tray. Facsimile output is
delivered to this tray.
Saddle stitch book tray
Paper on which saddle stitch has
been made is output here.
NOTES
G Do not put pressure on the saddle stitch finisher (particularly each tray).
G Be careful about the offset tray during printing because the tray moves up and down.
G Some other peripheral units may be needed for installation of the saddle stitch finisher and some peripheral units cannot
be installed together with the saddle stitch finisher. For combination of the peripheral units, see the list of combination of
peripheral units on page xxxx.
Specifications
Name
Number of trays
Exit system
Tray type
Paper capacity
Paper size
Paper weight
Paper type
Paper limit detection
Offset function
Paper size for stapling
Stapling capacity

Saddle stitch finisher

2
Print face down
Upper tray: offset tray, Lower tray: saddle stitch book tray
Upper tray: 1,000 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m
sheets (8-1/2" x 14" or B4 size or larger, 20 lbs. or 80 g/m
Upper tray: max. 11" x 17" or A3, min. 5-1/2" x 8-1/2"R or A5R
Lower tray: max. 11" x 17" or A3, min. 8-1/2" x 11"R or A4R
Upper tray: 15 to 54 lbs. or 56 to 205 g/m
Lower tray: 17 to 34 lbs. or 64 to 128 g/m
Upper tray:same as the specifications of paper for feeding in the main unit
Lower tray:
Provided in the upper tray only
Provided in the upper tray only, offset amount: xx inch (xx mm)
Upper tray:11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3,
B4, A4, A4R, B5, and B5R
Lower tray: 11" x 17", 8-1/2" x 11"R, A3, B4, and A4R
8-1/2" x 11" or A4 or smaller size: 50 sheets*(20 lbs. or 80 g/m
8-1/2" x 14" or B4 or larger size: 25 sheets*(20 lbs. or 80 g/m
*Up to two sheets of 34 lbs. or 128 g/m
Top cover
Open for misfeed removal.
Stapler section
Open the front cover and pull
out this section to replace the
staple cartridge or to remove
jammed staples.
Front cover
Open to replace the staple cartridge
or to remove jammed staples.
2 ), Lower tray:
2
2
2
)
2
)
2 paper can be included as covers.
5
2 ) or 500
5-17