Sharp AR-350 Operation Manual page 91

Remove the staple box.
9
Raise the lever at the end of the staple box.
10
Return the lever to its original position.
11
I Punch scrap disposal
Pull the knob and slide the saddle stitch
1
finisher away from the main unit.
Pull out the punch scrap collecting
2
container and remove the punch scraps.
If the top staple is bent, be
sure to cut it out. If bent
staples remain, a staple jam
may occur.
Be careful not to scatter
punch scraps. Put them in
a plastic bag or the like for
disposal.
SADDLE STITCH FINISHER
Insert the staple box.
12
Push back the stapler section.
13
Close the front cover.
14
NOTE
Execute test printing in the staple sort mode to ensure
that stapling is performed properly.
Return the punch scrap collecting
3
container to its original position.
Push the saddle stitch finisher to the main
4
unit.
Push the staple box until it
clicks into place.
5
5-23