SPX FLOW 1600 GPH Instruction Manual

SPXFLOW JOHNSON PUMP of 5885 11th Street Rockford,
Illinois 61109 warrants to the original consumer purchaser that this
bilge pump will be free from defects in material and workmanship,
providing that the case is not opened or the pump otherwise
abused for a period of 3 years from the date originally purchased.
The exclusive remedy of the consumer purchaser in the the event
the product does not meet this express Limited Warranty is to
return the pump to Johnson Pump at the above address, freight
prepaid with your sales receipt and $2.50 to help defray the cost
of postage and handling. IMPORTANT: FOR THIS WARRANTY
TO BE EFFECTIVE, JOHNSON PUMP MUST BE SUPPLIED
WITH THE ORIGINAL PURCHASE DATE OF THE PUMP.
THE ACCEPTANCE BY JOHNSON PUMP OF ANY PUMP
RETURNED SHALL NOT BE DEEMED AN ADMISSION THAT
SUCH PUMP IS DEFECTIVE OR IN VIOLATION OF ANY
WARRANTY. THE COMPANY RESERVES THE RIGHT TO
REPAIR OR REPLACE THE PUMP.
NO REPRESENTATIVE OR OTHER PERSON IS AUTHORIZED
TO ASSUME FOR JOHNSON PUMP ANY ADDITIONAL
LIABILITY IN CONNECTION WITH THE SALE OF ITS
PRODUCTS OR TO ALTER THIS WARRANTY IN ANY WAY.
IN NO EVENT WILL JOHNSON PUMP BE LIABLE FOR
MORE THAN THE SALES PRICE OF THE PUMP. UNDER NO
CIRCUMSTANCES WILL JOHNSON PUMP BE LIABLE FOR
ANY LOST PROFITS, INCIDENTAL OR CONSEQUENTIAL
COSTS, EXPENSES, OR DAMAGES. THE LIMITATION
ON LIABILITY FOR LOST PROFITS, INCIDENTAL OR
CONSEQUENTIAL COST EXPENSES OR DAMAGES SHALL
SURVIVE ANY FAILURE OF ESSENTIAL PURPOSE OF THIS
LIMITED WARRANTY. Some states do not allow the exclusive
or limitation of incidental or consequential damages, so the above
limitation may not apply to you.
NO EXPRESS OR LIMITED WARRANTY, INCLUDING
WARRANTY OF MERCHANTABILITY AND FITNESS SHALL
EXTEND FOR ANY PERIOD OF TIME GREATER THAN 18
MONTHS FROM THE DATE OF ORIGINAL PURCHASE OF
THIS PRODUCT. Some states do not allow limitation on how
long an implied warranty lasts so the above limitation may not
apply to you.
CAUTION - Warranty void if seal on pump is broken, if any electric
cord is cut back more than 3 inches, if electric splices become
submerged, or if pump is installed contrary to instructions or warnings.
Bilge Pumps are designed to exhaust standing water only. These
pumps are not intended for damage control. Bilge Pump capacities
may not be sufficient to prevent flooding from rapid accumulation
of water due to storms, rough weather and/or rapid leaks created
by hull damages or unsafe navigational conditions.
Diagram 1: Ultima Switch
without panel with panel
A Bilge Pump E E
B Electric Ultima Switch
A
B B
C DC Supply
D Panel H H
F
E Brown Wire (pump)
G
G
D
F Black Wire (pump)
J
G Brown/White Wire (switch)
H Brown Wire (switch)
K
J Switch
K Fuse
C
Diagram 2: Ball Float Switch
without panel with panel
A Bilge Pump
C
B Ball Float Switch C
C DC Supply
D Panel
E Brown Wire (pump)
F
F
F Black Wire (pump)
G Brown Wire (switch)
A A
H Brown Wire (switch)
E E
G
B
H
H
Diagram 3: Electronic Float Switch
without panel with panel
A Bilge Pump
E
E
B Electronic Float Switch
C DC Supply B
B
D Panel
H H
E Brown Wire (pump)
F
G
G
F Black Wire (pump) I
D
G Brown/Red Tracer Wire (switch)
J
H Brown Wire (switch)
K
I Black Wire (switch)
J Switch
K Fuse
C
A
F
Made by SPX FLOW Johnson Pump
C
Assembled in USA
D
Customer Service & Support
Phone: +1 847 671-7867
E-mail: jp-customerservice@spxflow.com
G
B
For more information about our worldwide locations,
approvals, certifications, and
visit Johnson Pump - Marine at www.spxflow.com
SPX FLOW, Inc. reserves the right to incorporate our latest design
and material changes without notice or obligation.
A
Design features, materials of construction and dimensional data,
as described in this bulletin, are provided for your information only
F
I and should not be relied upon unless confirmed in writing. Please
contact your local sales representative for product availability in your
region. For more information visit www.spxflow.com.
The green " " and " " are trademarks of SPX FLOW, Inc.
52283 R01 (ISSUED 11/2018)
C
COPYRIGHT © 2018 SPX FLOW, INC.
Heavy Duty
Bilge Pump
Heavy Duty Bilge Pump Submersible Bilge Pump
1600-4000 GPH
S U B M E R S I B L E B I LG E P U M P
1600, 2200, 4000 12/24V
1 6 0 0 , 2 2 0 0 , 4 0 0 0 G P H
5 2 2 8 3 R 01 ORIGINAL INSTRUCTIONS/TRANSLATION OF ORIGINAL INSTRUCTIONS
READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR
( 11 / 2 018 )
®
local representatives,
INSTRUCTION MANUAL
(ENGLISH/US)
ORIGINAL INSTRUCTIONS/TRANSLATION OF ORIGINAL INSTRUCTIONS
READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR
SERVICING THIS PRODUCT SERVICING THIS PRODUCT