Vivint Smart Hub Panel? User's Quick Start Manual page 7

Arm to Stay Mode
Arming to Stay Mode is for arming the home security service when people are
staying in the house. Stay Mode arms the sensor‐ protected perimeter doors
and windows while not arming the interior motion sensors or other interior
doors. This allows your home to be occupied while the system is partially
armed.
Stay Mode is used for arming the system after everyone is inside and no one is
expected to enter or leave. When the system is armed in Stay Mode, you can
move about your home without triggering the home security alarm. All the
interior protection is off. But, if a sensor-protected perimeter door or window
is opened, an alarm will sound.
Entry Delay in Stay Mode
When arming the system in Stay Mode, an Entry Delay option is shown on the
panel's Arming screen. This provides a way for an authorized person to enter
using a sensor-protected door and disarm the system before an alarm is
triggered.
This option is enabled, so the delay allows time for disarming the system after
the door is opened. Disabling this option removes the delay, causing those
entrances to instantly trigger the alarm in Stay Mode.
Quick Exit in Stay Mode
A configurable option called Quick Exit may be displayed on the Security
Screen while the system is armed in the Stay Mode .
Pressing the Quick Exit button starts a timer to allow someone to exit or enter
through a sensor-protected door programmed for delay without having to
disarm the entire system. When the delay timer runs out, the system returns to
the normal Stay Mode.
Silent Exit in Stay Mode
The following options for silencing the beeps and announcements are available
when arming or disarming the system in Stay Mode.
On the Security screen, a Silent Exit button is displayed.
l
On the Arming screen, a Silent Exit button is displayed.
l
On the Exit Delay screen, a Silent Exit button is displayed.
l
4