Vivint Smart Hub Panel? User's Quick Start Manual page 25

Quick Arming
Quick Arming allows you to arm your system without having to enter a User
Code.
When you press the Stay or Leave button, the system will start to arm without
requesting a User Code.
Off
l
On
l
Quick Bypass
Normally sensors that are open at the time the system is armed will require
force bypassing by entering your User Code. The system can be set so a User
Code is not required to bypass open sensors when the system is armed.
Off
l
On
l
Quick Exit
The Quick Exit option allows you to start the Exit Delay while the system is
armed. This allows you to leave the home without having to disarm and rearm
the system.
When the Quick Exit option is on, a Quick Exit button will display on the
security screen. Press the button to start the Exit Delay.
After Quick Exit, the system will fully re‐ arm in the mode that it was in before
(Stay or Leave Mode).
Off
l
On
l
Auto Un-bypass
Normally, sensors manually bypassed with the User Toolbox will automatically
have their bypasses removed when the system is disarmed. The system can be
set so sensors that have been manually bypassed will stay bypassed until the
bypass is manually removed.
Off
l
On
l
22