System Test - Vivint Smart Hub Panel? User's Quick Start Manual

System Test

Even though your security system electronics is self-monitoring, it is still
important to regularly test the system manually. The System Test is used to
test each of the sensors in the system, as well as LED light indicators and the
sounder. The Admin User PIN code is required to test the system.
IMPORTANT: Test your security system weekly to ensure continued
protection and proper system operation.
To test the system
1. At the Home screen, press the main Menu in the lower right-
hand corner of the touchscreen display.
2. Press Security, enter a valid user PIN, and then press System
Test.
3. Follow the prompts to teach each sensor:
For door or window sensors, open and close the door or
l
window.
For motion detectors, stay out of the protected area for five
l
minutes, then walk through the area.
For portable sensors and wireless keypads, press a button.
l
For smoke, CO, or glass break detectors, press the detector's
l
test button.
5. When all sensors have been tested, a confirmation screen
appears.
NOTE: System Test start and stop test reports are sent to the Central Station.
19