Vivint Smart Hub Panel? User's Quick Start Manual page 14

Additional Information: Fire Safety
Your home can be installed with fire and carbon monoxide detectors as part of
Vivint's overall home security system. These security services are active 24
hours-a-day, 365 days a year.
In the event of a fire or poisonous CO gas emergency, the installed smoke and
CO detectors automatically activate your security system. Not only will the
smoke and CO detectors emit a loud alarm sound, the panel emits a loud
intermittent alarm sound to warn you of the alarm. The fire alarm sound
continues for four minutes or until you enter a User PIN at the panel. Your
Vivint Field Service Professional can increase the amount of time the fire alarm
sounds before automatically turning off.
If the Alarm Sounds
Get out and stay out. Never go back inside for people or pets.
l
If you have to escape through smoke, get low and go under the
l
smoke.
Call the fire department from outside your home.
l
Automatic Fire Alarm
If the fire alarm sirens are sounding, do the following:
1. If flames and smoke are present, yell "FIRE!" to alert everyone
else.
2. Evacuate all occupants from the house and call your local Fire
Department from a safe location.
OR
1. If no flames or smoke are apparent, investigate the possible
causes of the alarm.
2. Go to the panel and enter your PIN to stop the fire alarm.
3. Review the Alarm Memory (in the system activity history) to
determine which sensor caused the alarm.
4. Go to the sensor and look for a possible reason the sensor was
triggered.
5. Correct the condition that caused the detector to sense smoke.
11