Emergency And Fire Protection - Vivint Smart Hub Panel? User's Quick Start Manual

Emergency and
Fire Protection
The Emergency button (+) is found in the status bar of the
display (right-hand side). Use this button in case of an emergency.
Note that just pressing this button does not trigger an alarm.
When you press the button, the Emergency screen appears with three options:
Use the Emergency buttons
1. Press and hold the appropriate Panic, Emergency, or Fire button for at
least 2 seconds until the alarm sounds.
2. The panel will send a signal immediately and a Monitoring Station
representative will confirm the emergency through Vivint Live, which is
the two-way voice communication at the panel. If no one at your home
responds, the representative will call your emergency contacts. If the
first emergency contact cannot be reached, Vivint will dispatch the
authorities and continue trying to reach your emergency contacts.
About fire and carbon monoxide alarms
Your home may be installed with fire and carbon monoxide (CO) detectors as
part of the comprehensive smart home security system. This safety feature is
enabled 24 hours a day, 365 days a year.
In the event of a fire, smoke, or CO gas emergency, that specific detector
automatically activates your security alarm. The detector will emit a loud
alarm, and the panel will also emit a loud intermittent alarm to warn you. The
panel alarm continues for four minutes or until you enter your PIN at the panel.
10