System Settings - Vivint Smart Hub Panel? User's Quick Start Manual

System Settings

The Vivint Technician who installed your system can also configure various
system settings in order to customize the installation. The options listed below
show the default settings and have an area or line to denote custom settings.
Siren Run Time
If there is a burglary, panic (police), or emergency alarm, the panel sounds the
siren for a preset time. After the time expires, the siren will stop sounding.
(Auxiliary alarms run for an unlimited time.)
4 Minutes is the default, or the following:
8 Minutes
l
12 Minutes
l
16 Minutes
l
Unlimited
l
Sensor Trigger Limit
The system limits the number of times a sensor can re‐ trigger an alarm while
the system is armed. The setting is 1 to 6 times per sensor, per arming period.
2 Triggers is the default, or the following:
1 Trigger
l
3 Triggers
l
4 Triggers
l
5 Triggers
l
6 Triggers
l
Fire Alarm Run Time
If there is a fire or carbon monoxide alarm, the panel sounds the fire alarm for a
preset time. After the time expires, the fire alarm will stop sounding.
4 Minutes is the default, or the following:
8 Minutes
l
12 Minutes
l
20