Arm The Security System - Vivint Smart Hub Panel? User's Quick Start Manual

Arm the Security
System
Arming your system activates monitoring of the security sensors*
(doors, windows, motion) in order to protect your home from
intrusion. If a sensor is triggered when the system is armed, an
alarm results and the Monitoring Station contacts you through
Vivint Live™, the two-way voice communication on the panel.
Press the Arming icon
Arm your system to Stay mode by dragging to the left. The Exit Delay
timer will silently count down 60
to be able to stay protected while at home. Arm Stay activates all
perimeter sensors (i.e, door/window) but not the interior sensors.
OR
Arm to Away mode by dragging to the right. The Exit Delay timer will
audibly count down 60
protect your home while you're away. Arm Away activates all of the
security sensors including interior sensors and motion detectors.
Silent Exit— Use this option to mute sounds during your exit this time.
Turn off Entry Delay— Use this option to turn off the delay timer, so
the system arms immediately rather than counting down.
*Some 24-hour sensors such as smoke and CO detectors, panic pendants, and
flood sensors are always active and can trigger an alarm 24x7x365.
‡
Specific time values indicate the default setting.
, and then:
‡
seconds. Use Arm Stay when you want
‡
seconds. Use Arm Away when you want to
3