Specifications - Sharp MD-SR60E Operation Manual

Specifications

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes
for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some deviations
from these values in individual units.
General
Power source:
DC 1.2V: Rechargeable Nickel-Metal Hydride battery
(AD-N70BT) x 1
DC 5V: AC adaptor (AC 230 - 240V, 50/60 Hz)
DC 1.5V: Commercially available, "AA" size (LR6), al-
kaline battery x 1
DC 4.5V: Separately available car adaptor, AD-CA20X
(for cars with a 12-24V DC negative earth elec-
trical system)
Power consumption: 7 W (AC adaptor)
Output RMS; 20 mW (10 mW + 10 mW)
power: (0.2% T.H.D.)
Charging Approx. 3.5 hours (90 %)
time: Approx. 5.5 hours (fully charged)
(When using the AC adaptor included with the unit)
Battery life:
When using the rechargeable
battery (fully charged) in-
cluded with the unit
Continuous recording:
Approx. 4.5 hours
Continuous play:
Approx. 6.5 hours
The continuous recording time is for analogue inputs when the
volume level is set to "VOL 0".
The continuous play time shows the value when the volume
level is set to "VOL 15".
The above values are the standard values when the unit is
charged and used at an ambient temperature of 20 C (68 F).
The operating time when using an alkaline battery may be dif-
ferent, depending on the type and manufacturer of the battery,
and on the operating temperature.
45 46
**06-REFERENCES 46
Input sensitivity:
Recording level
MIC H
MIC L
LINE
Output level:
Headphones
LINE
Dimensions:
Weight:
Input socket:
Outputsocket:
When using a commercially
available, high capacity, "AA"
MiniDisc Recorder
size (LR6), alkaline battery
Continuous recording:
Type:
Approx. 3 hours
Signal readout:
Audio channels:
Continuous play:
Approx. 7 hours
Frequency response: 20 – 20,000 Hz ( 3 dB)
Rotation speed:
Error correction:
Coding:
Recording method: Magnetic modulation overwrite method
Sampling frequency:44.1 kHz (32 kHz and 48 kHz signals
Wow and flutter:
Reference input level Input impedance
0.25 mV 10 k ohms
2.5 mV 10 k ohms
100 mV 20 k ohms
Specified Maximum Load
output output level impedance
— 10 mW + 10 mW 16 ohms
250 mV (-12 dB) — 10 k ohms
Width: 99.9 mm (3-15/16")
Height: 22.9 mm (29/32")
Depth: 77.9 mm (3-3/32")
191 g (0.42 lbs.) with rechargeable battery
Line/optical digital, microphone
(powered by the main unit)
Headphones (impedance: 16 ohms)/remote
control unit
Portable MiniDisc recorder
Non-contact, 3-beam semi-conductor laser pick-up
Stereo 2 channels/monaural (long-play mode)
1 channel
Approx. 400 – 900 rpm
ACIRC (Advanced Cross Interleave Reed-
Solomon Code)
ATRAC (Adaptive Transform Acoustic Coding),
24-bit computed type
are converted to 44.1 kHz, and then recorded.)
Unmeasurable (less than 0.001% W. peak
02.07.2000, 10:04 AM
)