Sharp MD-SR60E Operation Manual page 13

Recording : continued
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this unit.
3
Press the REC LEVEL (5
to adjust the recording level (only ana-
logue connection).
Adjust the recording level so that the maximum
sound volume from the source makes the read-
ing swing somewhere between –4 dB and 0 dB.
Level meter indicator
For digital connection, it is not necessary to ad-
just the recording level.
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Here you can search for the track to record.
5
Press the 06 06 button.
06 06 06
6
Begin playback on the stereo system to
start recording.
**03-BASIC OPERATION 13
To interrupt recording
Press the 06 button.
The track number will be increased by one each time
the recording is interrupted.
To stop recording
5 or 4 4 ) button
5 5 5 4 4 4
Press the •
When recording stops, "TOC" appears. Whilst "TOC"
appears, recorded contents haven't been written on
the MiniDisc.
0dB
4dB
To write recorded contents on the MiniDisc
Press the • /:OFF button whilst in the stop mode.
The power turns off after recorded contents have been
written on the MiniDisc.
/:OFF button.
TOC display
02.07.2000, 10:03 AM
12 13