Sharp MD-SR60E Operation Manual page 22

Recording from a Microphone : continued
Sound-actuated recording
(Mic Synchronized recording)
1
Press the REC button.
2
Press the REC LEVEL ( 5
ton to adjust the recording level.
Level meter indicator
3
Press the ENTER/SYNC button to select
the recording sensitivity.
MIC SYNC H : Recording starts when the unit
detects –24 dB or more
(The unit can start recording from
quiet sounds).
MIC SYNC L : Recording starts when the unit
detects –12 dB or more.
4
When a sound, such as person speaking,
is picked up by the microphone, record-
ing will begin automatically.
If the unit starts recording too often from low unwanted
noises, set the microphone input to "MIC SYNC L".
Recording sensitivity can be changed, whilst recording.
21 22
**04-USEFUL FEATURES 1 22
About pause function
The unit automatically pauses when the microphone does
not pick up any sound for 3 seconds or more. (Pause func-
tion does not work for approximately 10 seconds after a
recording starts.) When the microphone picks up sound
again, recording starts automatically.
5 or 4 4 ) but-
5 5 5 4 4 4
Notes:
Whilst making a mic recording, do not connect anything
to the OPTICAL/LINE IN socket on the main unit.
To use a microphone, be sure it is a plug-in-power type
0dB
microphone.
4dB When a plug-in-power type microphone is plugged
•
in, the main unit will provide power for the
microphone's operation.
If a different type of microphone is plugged in, it may
•
not operate properly or it may cause the unit to mal-
function.
Insert the plug firmly. If you don't, the recording will not
be made properly.
Use a microphone with a 3.5 mm (1/8") diameter stereo
mini plug.
02.07.2000, 10:03 AM