Changing Default Settings - Sharp MD-SR60E Operation Manual

Changing default settings

Beep sound
You can eliminate the confirmation sound that beeps
when you press a button.
Auto play
You can make the unit not play automatically when
you insert a playback-only MiniDisc or an accidental
erasure protected MiniDisc.
Auto power save
When the unit is used in a place exposed to much
vibration, sound skipping can be decreased by can-
celling the auto power save function. (Battery will
drain faster.)
What is auto power save function?
Auto power save function automatically adjusts the sound
skip memory storage to be from 5 to10 seconds depend-
ing on playback conditions, this saves battery power.
If the MiniDisc unit is used in areas of much vibration it
may be necessary to fix the sound skip memory to 10
seconds "Psave OFF" this will improve performance un-
der difficult conditions but uses more power. (When the
AC/car adaptor is used the 10 second mode is always
used)
**05-ADVANCED FEATURES 39
Whilst in the stop mode ...
1
With a MiniDisc inserted, press the MODE
button for 2 seconds or more. "SET UP"
will appear.
When you release the button, "BEEP ON" or
"BEEP OFF" will appear.
2
Press the 5 or 4 button to display the
menu. Then press the MODE button to
switch items.
[BEEP ON] [A-PLAY ON]
Beep sound Auto play
[BEEP ON] (*) [A-PLAY ON] (*) [AUTO
[BEEP OFF] [A-PLAY OFF]
(*) indicates default setting.
3
Press the • /:OFF button.
02.07.2000, 10:04 AM
[AUTO Psave]
Auto power
save
Psave] (*)
[Psave OFF]
38 39