Sharp MD-SR60E Operation Manual page 35

Titling a MiniDisc : continued
Operation of the MiniDisc for stamping
6
Load a MiniDisc for stamping.
7
Press the ENTER/SYNC button.
The unit will finish recording the character infor-
mation and enter the stop mode.
**05-ADVANCED FEATURES 35
Notes:
If the total number of tracks on the master MiniDisc does
not match that on the MiniDisc for stamping, the unit will
display "Can't STAMP" and turn off the power.
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
Use a MiniDisc that was recorded by this unit to make
a MiniDisc for stamping. Character information may not
be transferred if you use a MiniDisc recorded by other
equipment. In such a case, enter at least one charac-
ter for the disc name or the track names. You can trans-
fer information once you record the TOC.
02.07.2000, 10:04 AM
34 35