Sharp MD-SR60E Operation Manual page 43

Error Messages : continued
ERROR MESSAGES
NO SIGNAL
PLAY MD
POWER ?
PROTECTED
SORRY
TEMP OVER
(**)
TOC FORM
TOC FULL
Tr. Protect
? DISC
Number or symbol appears in (*) position.
**06-REFERENCES 43
MEANING
Poor connection of the digital cable.
No output signal comes out from the
connected unit to playback.
You recorded on a playback-only
disc.
Improper power is being supplied.
The write protection tab of a MiniDisc
is set to the protected position.
You tried to record on a playback-
only disc.
Since a track number is currently
being located or written to, the unit
cannot accept your command.
The temperature is too high.
There is an error in the recording
signal.
There is no space left for recording
character information (track names,
disc names, etc.).
The track has been protected from
being erased.
A disc which contains data other than
music was played.
There is an error in the signal re-
corded on the disc.
REMEDY
Connect the digital cable securely.
If the portable CD player has a function to prevent sound
skips, deactivate it.
Playback with the connected unit.
Replace it with a recordable disc.
Use one of the specified power sources.
Move the write protection tab back to its original position.
Replace it with a recordable MiniDisc.
Wait for a while and try the operation again.
Turn off the power, and wait for a while.
Erase all of the tracks, and then record again.
Replace it with another recordable disc.
Edit the track with the device on which it was recorded.
A disc which contains non-music data cannot be
played.
Replace it with another recorded disc.
02.07.2000, 10:04 AM
42 43