Sharp MD-SR60E Operation Manual page 27

Checking Displays : continued
To display the playing time of an indi-
vidual track
1
Whilst in the stop mode, press the 5
4 button to display the track number and
4 4 4 4
track name.
2
Press the DISP button to display the play-
ing time for that track.
Each time the 5 or 4 button is pressed, the
playing time of the previous or next track will be
displayed.
**04-USEFUL FEATURES 2 19
Checking the remaining amount of
battery level
The remaining amount of battery level is shown
by the battery indicator (
5 or
5 5 5
Track number
Track name
When the battery is completely discharged, the battery
indicator will flash. Recharge the battery or replace the
alkaline battery with a new one.
When the battery has run completely out, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
If you use the battery which you stopped charging half-
way, "
tery is completely charged.
Playing time
The battery indicator will not correctly display the remain-
ing capacity for approximately 10 seconds after the power
has been turned on.
When the AC adaptor or a separately available car adap-
tor is used, the battery indicator will not be shown.
The number of bars shown in the battery indicator may
increase or decrease, depending on the operation be-
ing performed. This is normal.
) during operation.
How to read the battery indicator
When the battery
When the battery
level is very low
level is high
" may appear. It does not mean that the bat-
02.07.2000, 10:05 AM
26 19