Editing A Recorded Minidisc - Sharp MD-SR60E Operation Manual

Editing a recorded MiniDisc

To erase tracks one at a time
1
Start playing the track to be erased, and
press the 06 06 button.
06 06 06
2
Press the EDIT button to select "ERASE".
3
Press the ENTER/SYNC button.
To cancel the operation, press the • /:OFF button.
4
Press the ENTER/SYNC button again.
The track will be erased.
5
To erase other tracks, repeat steps 1 - 4.
36 35
**05-ADVANCED FEATURES 36
To erase all of the tracks at once
1
Whilst in the stop mode, press the EDIT
button to select "ALL ERASE".
2
Press the ENTER/SYNC button.
To cancel the operation, press the • /:OFF button.
3
Press the ENTER/SYNC button again.
All of the tracks will be erased.
Caution:
Once a track has been erased, it can not be recovered.
Check the track number before erasing it.
02.07.2000, 10:04 AM