YASKAWA VIPA IM 053ML Manual page 56

Deployment
Web server
Firmware
Configuration
Web page with selected
module
Info
Data
Parameter
Diagnosis
56
With this function you can bring in a firmware update. You can get the appropriate firm-
ware file from VIPA. During the firmware update, SF and MT are blinking alternately.
When the update is finished, all the red LEDs are switched ON! After this perform a
power cycle.
In this dialog box, you have the option to save the current module configuration of your
MECHATROLINK-III coupler externally or to load a saved one. Before saving the module
configuration you should delete an existing one.
Here product name, order number, serial number, firmware version and hardware state
number of the according module are listed.
At Data the states of the inputs respectively outputs are listed.
If available the parameter data of the corresponding module may be shown and possibly
be changed.
If available the diagnosis data of the selected module can be shown here.
VIPA System SLIO
HB300 | IM | 053-1ML00 | en | 18-42