2.
Execute the display transceiver interface command to save the transceiver module
information, and contact H3C Support to verify that the transceiver module supports the digital
diagnosis function.
<Sysname> display transceiver interface fortygige 1/0/1
FortyGigE 1/0/1 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(km)
Digital Diagnostic Monitoring : YES
Vendor Name
Ordering Name
3.
If the problem persists, contact H3C Support.
Error frames (for example, CRC errors) on a port
Symptom
The output from the display interface command shows that error frames exist (for example, CRC
error frames) on a port.
Troubleshooting flowchart
Figure 12 Troubleshooting error frames (for example, CRC errors) on a port
: 40G_BASE_LR4_QSFP_PLUS
: LC
: 1301
: 10(SMF)
: H3C
: QSFP-40G-LR4-WDM1300
25