Stinger ELEV8 Installation Manual
8" floating multimedia display system
Hide thumbs
Also See for ELEV8:
- Installation manual (12 pages) ,
- User manual (36 pages) ,
- Installation manual (13 pages)
Related Manuals for Stinger ELEV8
Summary of Contents for Stinger ELEV8
- Page 1 INSTALLATION GUIDE 8" FLOATING MULTIMEDIA DISPLAY SYSTEM MODEL NUMBER: UN1880 Copyright © 2018 StingerElectronics.com...
-
Page 2: Precautions
AGREEMENT: End user agrees to use this product in compliance with the instructions and terms of use and with all State and Federal laws. STINGER provides instructions and safety warnings with respect to this product and disclaims all liability for any use not in conjunction with those instructions or other misuse of its product. - Page 3 MODEL NUMBER: UN1880 INSTALLATION GUIDE CONTENTS Precautions...........2 Parts List..........4 Assembly & Mounting......5 Wiring & Connections......8 TECHNICAL SUPPORT: Stinger is a Power Brand of AAMP Global 800-477-2267 15500 Lightwave Drive, Suite 202 support@aampglobal.com Clearwater, Florida 33760 CUSTOMER SOLUTIONS: 800-477-2267 customersolutions@aampglobal.com...
-
Page 4: Parts List
PARTS LIST DESCRIPTION PART NO Touch Panel Display UN1880-D Radio Module UN1880-M Mounting Brackets / Hardware Plastic Dash Mounting Bracket Display Mounting Clamp SE-1000 Metal Mounting Bracket Horizontal Display Angle Plate Rubber Boot SE-1001 M4 X 6 Screw M4 X 14 Screw M4 x 18 Screw SE-1002 M5 x 10 Screw... -
Page 5: Assembly & Mounting
MULTIPLE MOUNTING OPTIONS... ELEV8 can be configured for different mounting applications: • Using a Double DIN Dash Kit • Using Factory Radio Mounting Brackets • Using a Single DIN Dash Kit • Custom Mounting Applications This installation guide will cover using a Double DIN Dash Kit... - Page 6 ASSEMBLY AND MOUNTING Using Double DIN Dash Kit AFTERMARKET DASH KIT (NOT INCLUDED) Display Adjustment: Loosely attach the radio module and FIG. A mounting bracket assembly to the side brackets of an aftermarket dash M5 X 10 mounting kit using #10 X 3/8 screws for the bottom locations and the M5 X 10 screws for the top locations (radio chassis), do not tighten (FIG.
- Page 7 ASSEMBLY AND MOUNTING Using Double DIN Dash Kit Insert a M5 X 10 on each side of the clamp assembly. Use Hole A for no vertical tilt or Hole B for 8 degrees of vertical tilt as determined in Step 3. BOOT ASSEMBLY PLASTIC "TAB"...
-
Page 8: Wiring & Connections
WIRING & CONNECTIONS Display Cable Power / Speaker Multi Camera LVDS Cable HDMI Input GPS Antenna USB1 CP/AA 15 Amp Fuse USB2 Radio Antenna TOSLINK AV In/Out - Rear Camera Microphone SiriusXM Tuner Green/Black Rear Left Speaker - 16 Pin Power / Speaker Harness Connect radio power and Green Rear Left Speaker +... - Page 9 WIRING & CONNECTIONS 24 Pin AV / Rear Camera Harness Audio/Video Inputs & Outputs / Rear Camera Video Input / Analog Steering Wheel Control Inputs. Brown / Black SWC Key 2 Analog Steering Brown SWC Key 1 Wheel Control Input Black SWC Ground Yellow RCA...
- Page 10 WIRING & CONNECTIONS 6 Pin SWI / IR Harness 3.5mm Input for optional Steering Wheel Control Interface (PAC Audio SWI-CP2 is recommended for full compatibility and advanced features. Visit PAC-Audio.com) Steering Wheel Control Input IR Input - Not Used 4 Pin Microphone / Camera Audio Harness Input for External Microphone (included) used for hands-free calling, CarPlay and Android Auto Optional rear camera audio input Camera Audio Input...
- Page 11 Adding optional iGo Navigation is as easy as sliding in a Micro SD card into the front Front of radio module of the radio module. ELEV8 and iGO are optimized for ease of use and driving safety. Best Kits Dash kits, wire harnesses and antenna adapters.
- Page 12 StingerElectronics.com Copyright © 2018 IG-UN1880-REV.092518...
Need help?
Do you have a question about the ELEV8 and is the answer not in the manual?
Questions and answers