Establishing A Connection And; Charging Your S-Cube - DAMSON S-Series User Manual

3. Establishing a connection and reconnecting the
S-Cubes back into the Home Cinema System.
1 2
Power on the S-Woofer Change the mode on the
& S-Bar with the remote S-Cube(s) to JetStreamNet
control. (light blue) with a short tap
of the power on button. Wait
for a few seconds and the
LED in the d logo will change

Charging your S-Cube

AUX
DC
When your S-Cube is fully charged, the
red LED will not display.
Charge your S-Cube using
the power adaptor provided.
3
Short press the Pairing button on the S-Cube and the JSN/
pair button on the remote control at the same time, pressing
for less than 3 seconds. If you are playing content on the
system you will visibly hear music coming from the S-Cube
to light blue.
Red/Light blue blinking –
charging and in JetStreamNet
mode (ready to connect to other
S-Cubes or the S-Bar S-Woofer)
Red/Dark blue – charging and
connected to a Bluetooth device.
once it has reconnected.
PLEASE NOTE: when an
S-Cube is connected to the mains
but turned off, it is in a state of
'deep sleep'. It can be turned
on using the remote. When an
S-Cube is not connected to the
mains and not powered on, it is in a
state of 'hibernation'. To turn it on,
press the "power on" button on
the S-Cube. It will not turn on with
the remote control.
4 5
On the left surround speaker On the right surround
change the output switch to speaker change the output
triangle. switch to square.
23