Setup Using Your Tv's Arc Function - DAMSON S-Series User Manual

Setup using your TV's
ARC Function
IMPORTANT INFORMATION
If using a TV that supports ARC
additional audio can be sent
when using the S-Series in ARC
mode to transmit audio directly
from the TV, either via additional
devices connected via HDMI
or the TV's own content or built
in apps. Not all TV's support
4K audio pass through (Dolby
Atmos) via ARC. Projectors do
not currently support ARC.
If it is supported then the LED
on the S-Woofer will flash to
indicate it is receiving UHD audio
content. Please refer to your TV
manufacturers specification and
support to discover whether your
model will support UHD audio.
1
Ensure the TV has the ARC port. Ensure your TV
audio mode is set to output audio through ARC.
4
Change the S-Series to the "ARC" mode. The
LED in the d logo on the S-Bar will turn white.
There are two ways to change to the "ARC" mode.
2 3
Plug the HDMI cable into the Insert the other end of the
port HDMI (ARC) on TV. HDMI cable into S-Woofer
HDMI Output port.
4 4
a. b.
a. Press the "Mode" button, b. Press the "ARC" button on
"M" on the S-Bar quickly. the Remote Control.
HDMI
OUTPUT
17