Connecting/Disconnecting Your S-Bar To Bluetooth; Using The Remote Control; Using The Buttons On The S-Bar - DAMSON S-Series User Manual

Connecting/Disconnecting
your S-Bar to Bluetooth

Using the Remote Control

It is not recommended to connect the S-Series Home Cinema to a TV
via Bluetooth as the system and audio is not optimised for this use. It is
recommended to only connect to TV's or Projectors via high speed 2.0
HDMI cables.
• Ensure the S-Series is powered on.
• Navigate to the Bluetooth (BT) settings on your smart device.
• Select BT on the remote control to put the S-Series into Bluetooth
mode. The LED in the d logo on the S-Bar will be dark blue.
• Press and hold down the play/pause button on the remote control for
approximately 5 seconds. You will see the S-Bar appear in your available
devices list.
• Connect to the S-Bar.
• Stream music.
20

Using the buttons on the S-Bar

• Ensure the S-Series is powered on and navigate to the Bluetooth
settings of your smart device.
• Use the "M" (Mode) button on the S-Bar to select the Bluetooth mode.
The LED will be dark blue when in Bluetooth mode.
• Press and hold down the play/pause button on the S-Bar for
approximately 5 seconds.
• The S-Bar will appear on the discoverable list.
• Connect to the S-Bar.
• Stream music.
PLEASE NOTE: If you
then switch the mode on
the S-Series e.g. to HDMI1,
the S-Series will still remain
connected, in the background,
to your streaming device. You
may wish to disconnect or
forget the device.